EAST COAST FURNITECH PUBLIC COMPANY LIMITEDSET: ECF🇹🇭 TH

Business Operation · 2024

Corporate Information

Company Name

EAST COAST FURNITECH PUBLIC COMPANY LIMITED

Telephone

(66) 038-675-181-4

Website

www.eastcoast.co.th

Email

ir@eastcoast.co.th

Dividend Policy

Dividend Policy

The Company has a policy to pay dividends at a rate of not less than 40 percent of net profit after deducting corporate income tax from the Company’s financial statements and legal reserves as specified in the Company’s regulations. However, such dividend payments may be changed depending on the Company’s operating results, financial position, liquidity, and investment plans, including factors related to management, necessity, and other appropriateness in the future. Such dividend payment is under the authority of the Company’s Board of Directors to consider. The resolution of the Company’s Board of Directors regarding the approval of dividend payment must be presented to the shareholders’ meeting for consideration, except in the case of interim dividend payment, in which the Company’s Board of Directors has the authority to approve the interim dividend payment. Still, it must notify the shareholders’ meeting at the next meeting.

Historical Dividend Payments

This YearLast Year2 Years Ago3 Years Ago4 Years AgoMetricDescription
0-0.150.040.050.04Net profit per share (Baht : Share)Net profit per share (baht : share)
00.010.010.020.01Dividend per share (Baht : Share)Dividend per share (baht : share)
00000Dividend stock ratio (Number of original shares: dividend shares)Ratio of stock dividend payment (existing share : stock dividend)
00000Dividend share value per share (Baht : Share)Value of stock dividend per share (baht : share)
00.010.010.020.01Total dividend payment value (Baht : Share)Total dividend payment (baht : share)
01.080.890.661.26Dividend payout ratio to net profit (%)Dividend payout ratio compared to net profit (%)

Major Shareholders

Major Shareholders

No.NameShares% Shares
10,297MISS THUNYARUT (TIPPAWAN) SUKSAWAD147,560,55015.38
10,298MR. PACHARATANAPONG SUKSAWAD122,300,35012.75
10,299MR. KITTIPHAT (CHALEE) SUKSAWAD73,086,2007.62
10,300MR. CHALEE SUKSAWAD66,996,5506.98
10,301MR. NATPAPAT KESCHAIMONGKOL43,000,0004.48
10,302MR. ALUT THANASUWANDITE24,000,0002.5
10,303MR. WANLOP SUKSAWAD23,538,8002.45
10,304THAI NVDR COMPANY LIMITED16,996,6871.77
10,305MRS. KUNTHONG UDOMMAHUNTISUK10,000,0001.04
10,306MRS. WASSANA VIRIYATORNPHAN9,384,5000.98
10,307MRS. THITAREE UTTAMAMONGKOLCHAI8,500,0000.89
10,308MR. THIKUMPORN AROONNGAMWONG7,799,9000.81
10,309MR. THIKAYU AROONNGAMWONG7,799,8000.81
10,310MISS TUSSANEE WONGJIRAT7,204,0000.75
10,311MRS. WARAPORN SUKSAWAT6,283,1000.65
10,312MR. CHANYA LEERUNGRUANGPORN6,010,0000.63
10,313MR. WIROTE ONKONG5,400,0000.56
10,314MR. KHANUENGNIT CHINDA5,050,0000.53
10,315MR. NUMCHAI WANNAVISUT4,892,0000.51

Business Strategies Overview

Chairman's Message

Dear Shareholders and Investors,


On behalf of East Coast Furnitech Public Company Limited (the “Company”) or ECF, I am pleased to report the current performance and outlook of our furniture business, including the progress of various projects in which ECF has invested, as follows:


Current situation of the furniture business

In 2024, we have seen continuous growth in the furniture market, especially in the multi-purpose furniture product group. The Company has continuously developed and improved its manufacturing process to meet the diverse needs of customers and focus on quality while controlling costs and increasing management efficiency to ensure that our business is strong. We are currently a full-service furniture manufacturer.

Thai and global economic trends

The recovery after the COVID-19 outbreak for the Thai economy has shown a positive trend. Consumer confidence has begun to return, resulting in a continuous recovery in demand for home appliances and furniture. For the global economy, despite the uncertainties of some regional economies, demand for furniture remains high, especially in the online market, which continues to grow, which is a good opportunity for ECF to expand its business and distribution channels more widely.

Future operational plans and opportunities

We remain committed to expanding overseas markets and developing products that meet the needs of today's consumers. The Company has considered collaborating with strong partners in new markets to ensure that Our business will grow sustainably in the future. We plan to expand our production base and online distribution and create products with outstanding designs and innovations to create differences in the market. We also join hands with partners to invest in various businesses. In 2024, the company invested 25 percent in Digital Identity Co., Ltd., which operates a personal identity verification (KYC) business, a business based on a technology system, to further expand the company's growth.

In terms of corporate governance operations, in 2024, the company continued to receive an assessment of corporate governance for Thai listed companies, "Corporate Governance Report of Thai Listed Companies 2024" from the Thai Institute of Directors Association at the "Excellent" level and "Quality Assessment of the Annual General Meeting of Shareholders 2024" or AGM Checklist at a full score of 100 by the Thai Investors Association. The company has a development plan to further develop the business to be a part of sustainable development in other areas, namely society and the environment. The company will plan its work, and set indicators, and the board of directors will oversee and monitor the results of the operations to ensure that they are in line with the plan.

The company is determined to build confidence among shareholders and investors. With a focus on sustainable and quality long-term growth, we are confident that these efforts will play an important role in adding value and strengthening our business going forward.

We would like to thank our shareholders and investors for their continued trust and support. We sincerely hope to receive your continued cooperation and encouragement to help our business grow sustainably and stably.


On behalf of the Board of Directors of

East Coast Furnitech Public Company Limited


General Thedsak Marom

Chairman of the Board of Directors

Vision

“Committed to maintaining the stability and firmness in the furniture business, together with creating opportunities for business growth, continuously seeking for opportunities to expand into other businesses for sustainability”

Objectives

“To lead the organization into the development and profits with sustainable growth along with social and environmental responsibility, including good corporate governance.”

Goals

The company has set a goal to maintain the growth rate of sales and profit from operations in the furniture business group to grow continuously at least 10-15 percent per year and aims to become an organization that develops and expands investment to reduce costs in the furniture manufacturing business in a complete cycle to create competitive strength, including conducting business ethically, respecting the rights and being responsible to shareholders and stakeholders, benefiting society and reducing the impact on the environment, by being able to maintain the gross profit rate of the furniture business at least 25 percent per year. In addition, it must be able to create a level of satisfaction with the company's products from customers at least 80 percent, considering the results of the annual customer satisfaction survey.


For the long-term goal, the Company has set the return from the renewable energy business to be no less than 30 percent of the Company's and all subsidiaries' net profit within the next 3 years, including setting the Company's sustainability targets for the next 3 to 5 years by setting the following indicators:


1. Diversifying the business risks to other types of businesses with potential and continuous growth opportunities


2. Being a leader in the business of being a full-service furniture manufacturer and distributor, with a growth rate of sales revenue of no less than 10-15 percent each year and being able to reduce sales costs through efficient production management, which can be reduced by no less than 5 percent compared to the previous year


3. The Company can continuously reduce greenhouse gas emissions in the business value chain when calculated as a proportion compared to the previous year, by at least 5 percent onwards


The Company will operate to achieve its goals following the specified operational strategy.


Business Strategies

Sustainability

The organization is developed to grow with sustainability such as the cost and expense reduction of major raw materials for the Company’s furniture business, the expansion of business into the renewable energy business as an important tendency and a part of the creation of energy stabilization, which would help to continuously generate revenue and profit for the business in overall, and seek for other businesses related to main business or new business opportunities that could generate income for secured growth, etc., and operate the business with responsibility to all stakeholders along the value chain, society, environment, and good corporate governance.

Diversification

Diversifying business risks, such as having both income from domestic and international sales, having a diverse customer base, ranging from exports, modern retailers, and furniture retailers nationwide, developing an e-commerce sales model via online platforms, and also expanding the business to other types of business, such as energy businesses, agricultural products businesses, and identity verification (KYC) businesses, to diversify risks and not rely solely on the furniture business.

Adaptation

Ready for strategies of changes and continuously adapt itself to creating opportunities in business operations with stability and sustainability, such as starting from a furniture business to become a para rubber furniture business, particle board furniture MDF, and foil paper business, to reduce the production cost of furniture, etc.



Material Changes & Developments

Material Changes & Developments

YearDescription
2,024

On July 11, 2024, the Company received approval from the Extraordinary General Meeting of Shareholders No. 1/2024 for the issuance and offering of the Company's 5th Warrant to Purchase New Ordinary Shares (“ECF-W5”) in the amount of 479,752,824 units to the Company's existing shareholders. Such Warrants have a term of 1 year, expiring on July 29, 2025, with an exercise ratio of 1 Warrant to purchase 1 common share, with an exercise price of THB 0.55 per 1 new common share of the Company.


On November 13, 2024, Digital Identity Co., Ltd. was registered with the Department of Business Development to conduct business in providing identity verification services for both Thais and foreigners and other services related to identity verification, such as passport verification, face verification against databases, etc., as well as providing advice, designing and installing software and hardware systems, including other related products, with a registered capital of 1,000,000 baht, divided into 10,000 ordinary shares with a par value of 100 baht per share, in which the Company holds a 25 percent stake.

2,023

ECF Design Company Limited completed its registration with the Department of Business Development on July 27, 2023. Its primary operation involves distributing furniture products overseas, with a registered capital of 7,000,000 baht distributed among 70,000 common shares, each with a par value of 100 baht. By a joint venture contract dated June 20, 2023, with Homy Casa Inc., a California-based company in the USA, this company emerged as a result of a joint investment. It operates as a prominent furniture distribution business operator overseas. The signing of the aforementioned joint investment contract was approved during ECF's Board of Directors Meeting No. 2/2023, held on April 7, 2023.

2,022

On February 10, 2022, the company VV Rich Co., Ltd. was registered with the Department of Business Development to operate a business of cultivating and distributing agricultural products, in which the company holds a 99.97 percent stake.

2,019

On September 27, the Solar Power Project (GEP) located in Minbu, Magway, Myanmar, has successfully recognized commercial revenue for Phase 1 with a capacity of 50 megawatts and will proceed with the construction of the power plant for Phases 2, 3 and 4 to be completed as soon as possible.

2,017

On January 12, another subsidiary, ECF Power Co., Ltd., was registered to invest in the renewable energy business, in which the Company holds a 99.99 percent stake.


On April 3, the Company invested in a 220-megawatt solar power plant project of Green Earth Power (Thailand) Co., Ltd. (“Project” or “GEP”), located in Minbu, Magway State, Republic of the Union of Myanmar (“Myanmar”), with an installed capacity of 220 megawatts, with ECF Power Co., Ltd. (“ECF-Power”), a subsidiary in which the Company holds a 99.99 percent stake, as the investor to purchase 20 percent of the project’s shares. Later, the Extraordinary General Meeting of Shareholders No. 1/2017 on May 31, 2017, resolved to approve the purchase of GEP’s ordinary shares.

2,013

On March 26, the Company began trading shares on the Market for Alternative Investment (mai) for the first time (First Trading Day).

2,010

On October 1, East Coast Group began restructuring its business operations from a total of 5 companies within the group to operate under only one company, ECF. The restructuring process began with the purchase of all land used in the business operations, which at that time was the personal ownership of the company's directors, to be owned in the name of ECF. The transfer of production lines and distribution of finished products, products in process, raw materials, consumables, and some machinery and equipment from the 4 companies were owned by ECF, including negotiations to reduce the credit limits of the companies in the group with financial institutions and transfer them to ECF's credit limit. This was an action to repay debts between the group of companies to eliminate problems of connected transactions and conflicts of interest.

1,992

East Coast Industries Company Limited (ECI) which is the first company of East Coast Group was registered to operate a sawmill and wood drying factory, and produce and sell rubber wood furniture, located at Ban Bueng - Klaeng Road, Thang Kwian Sub-district, Klaeng District, Rayong Province, and in subsequent years, 4 additional companies under the East Coast Group were registered, totaling 5 companies, namely, East Coast Design Co., Ltd. (ECD), during this time, ECD was selected by the Department of Export Promotion to use the "Thailand's Brand" emblem to represent its high-quality export product.

ECI received the "Prime Minister Award" from the Ministry of Commerce, an award granted to exporters with outstanding performance and excellent product quality.

Subsequently, East Coast Furnitech Company Limited (ECF) was registered as the 3rd company to operate business as a manufacturer and distributor of self-assembled furniture made of particle board and MDF.

Later, V-Chats Decor Co., Ltd (VCD) was established as the fourth company to operate the business as a manufacturer and distributor of foil paper because ECF manufactures a lot of particleboard furniture, resulting in the need to import foil paper, VCD was therefore established to produce foil paper, so that the quality of production could be controlled, the foil paper will be distributed to ECF and general furniture manufacturers, and the juristic person registered later was V-Chats Industry Co., Ltd (VCI) to restructure the operations within the Company Group.


Use of Proceeds from Securities Offerings

Is There Money Raised from a Securities Offering Still to Report On?

Yes

Offerings

Type of SecuritiesType — Please SpecifyAmount Raised Given AsAmount Raised (Million Baht)Uses of the MoneyUsed as Declared?Progress / Reasons and Measures if Not Used as Declared
OtherWarrant to purchase common shares of East Coast Furnitech Public Company Limited No. 528732642025-07 · Objective: To be used as working capital in the business and to increase liquidity for the company. · Period type: 2871 · Start period: 2025-07 · End spent amount: 100.0 · Spent amount type: 2872 · Start spent amount: 1.0 · Expected amount type: 2872 · End expected amount range: 100.0 · Start expected amount range: 1.0 · 2025-07 · Objective: To be used as capital for investment in semi-automatic machinery to increase the company's furniture production process. · Period type: 2871 · Start period: 2025-07 · End spent amount: 64.0 · Spent amount type: 2872 · Start spent amount: 1.0 · Expected amount type: 2872 · End expected amount range: 64.0 · Start expected amount range: 1.0 · 2025-07 · Objective: To reduce financial cost burden and repay debts to financial institutions and/or debentures and/or other debts that are currently outstanding. · Period type: 2871 · Start period: 2025-07 · End spent amount: 100.0 · Spent amount type: 2872 · Start spent amount: 1.0 · Expected amount type: 2872 · End expected amount range: 100.0 · Start expected amount range: 1.0N

Since the date of issuance and offering of ECF-W5 until now, no one has expressed their intention to exercise the right to convert the warrants into common shares. Therefore, the company is still unable to use the money obtained for the purposes specified above.

Debt Instruments28736502022-12 · Objective: - To repay the ECF226A bond for 290.55 million baht, due on June 12, 2022. - To exercise the right to redeem ECF231A debentures on July 25, 2022, for 225 million baht. - To repay the loan for 200 million baht. - To be used as the working capital of the company for 134.45 million baht. · Period type: 2871 · Start period: 2022-12 · Spent amount type: 2873 · Start spent amount: 650.0 · Expected amount type: 2873 · Start expected amount range: 650.0Y
Debt Instruments28733002023-12 · Objective: - To repay the ECF236A bond for 200 million baht. - To repay the ECF23DA bond for 60 million baht. - Repay the Company's loan debt and subsidiaries - To use as the working capital of the company · Period type: 2871 · Start period: 2023-12 · Spent amount type: 2873 · Start spent amount: 300.0 · Expected amount type: 2873 · Start expected amount range: 300.0Y
Debt Instruments2873256.52023-12 · Objective: To repay the ECF23DA debentures due on December 8, 2023. · Period type: 2871 · Start period: 2023-12 · Spent amount type: 2873 · Start spent amount: 256.5 · Expected amount type: 2873 · Start expected amount range: 256.5Y

Law Governing the Debt Securities

The terms and conditions of the issuance and offering of debt instruments and equity instruments shall be governed by and construed by the laws of Thailand, including any applicable laws or notifications relating to the debentures and warrants to purchase ordinary shares of the Company.

Commitments Made in the Registration Statement

Are There Commitments or Conditions from an Offering or Listing?

Yes

Commitments and How They Were Met

• The Company's Debentures No. 1/2022, Series 1, 2, and 3 are due for redemption in 2023, 2024, and 2025, respectively, with the issuer retaining the right to redeem the debentures before the maturity date

The bond issuer will maintain the ratio of " Interest-Bearing Debt" to " Equity Ratio" for not more than 4:1 (four to one) according to consolidated financial statements at the end of the quarterly accounting period or the end of the fiscal year of the bond issuer to calculate this ratio as specified.


• The Company's Debentures No. 1/2023, Series 1, 2, and 3 are due for redemption in 2024, 2025, and 2026, respectively, with the issuer retaining the right to redeem the debentures before the maturity date

The Company will maintain the ratio of Interest-Bearing Debt to Equity Ratio as defined in entitlement terms for not more than 4:1 according to consolidated financial statements at the end of the quarterly accounting period or the end of the fiscal year throughout the life of bonds.


• The Company's Debentures No. 2/2023, Series 1, 2, and 3 are due for redemption in 2025, with the issuer retaining the right to redeem the debentures before the maturity date

The Company will maintain the ratio of Interest-Bearing Debt to Equity Ratio as defined in entitlement terms for not more than 4:1 according to consolidated financial statements at the end of the quarterly accounting period or the end of the fiscal year throughout the life of bonds.


Group Operating-Structure Policy

Description

Currently, the commercial revenue-generating businesses consist of


The Company operates an integrated furniture manufacturing and distribution business. Some of the furniture products are sold to ECF Holdings Company Limited, as a subsidiary, for resale. The Company also manufactures and distributes paper laminates, some of which are resold to VV Decor Company Limited, as a subsidiary, for further distribution.


ECF Design Company Limited, as a subsidiary, operates as a distributor of furniture products for export, primarily to customers in the United States and Europe.


ECF Power Company Limited, as a subsidiary, will operate in the renewable energy sector.


Digital Identity Company Limited, as an associated company, operates in the business of providing identity verification services and other related services.

Companies Where the Company Holds ≥10%

Companies (≥10% Holding)

Company NameAddressProvinceZip CodeTelephoneBusiness TypeSecurity TypeSharesPaid-up Shares
VV Decor Co., Ltd.25/28 Moo 12, T. Bueng Kham Phroi, A. Lam Luk Ka, J. Pathum Thani 12150Pathum Thani12150038-675-181-4Surface Paper DistributorCommon shares10,00010,000
ECF Holdings Company Limited37/4 Moo 10, Thang Kwian, Klaeng, Rayong 21110, ThailandRayong21110038-675-181-4Furniture distributorCommon shares450,000450,000
ECF Power Company Limited37/7 Moo 10, Ban Bung-Klaeng Road, Thangkewian Subdistrict, Klaeng District, Rayong Province 21110Rayong21110038-675-181-4Renewable Energy BusinessCommon shares90,928,25090,928,250
Planetboard Company Limited25/28 Moo 12, T. Bueng Kham Phroi, A. Lam Luk Ka, J. Pathum Thani 12150Pathum Thani1215002-152-7301-4MDF Manufacturer (Not yet operational and no commercial revenue to date)Common shares10,000,00010,000,000
Someva Plaza Company Limited25/28 Moo 12, Bueng Kham Phroi Subdistrict, Lam Luk Ka District, Pathum Thani Province 12150Pathum Thani1215002-152-7301-4Online platform (currently undergoing billing closure)Common shares200,000200,000
VV Rich Company Limited37/9 Moo 10, Thungkewian, Klaeng District, Rayong 21110, ThailandRayong21110038-675-181-4Cultivation and distribution of agricultural crops (no commercial revenue at this time)Common shares10,00010,000
Green Earth Power (Thailand) Co.,Ltd.33/4 The Nine Tower Grand Rama 9, 36th Floor, Huai Khwang District, Bangkok 10310Bangkok1031002-168-8168Being an investor in a 220-megawatt solar power plant project in Myanmar through a 100% stake acquisition in GEP Myanmar Company Limited.Common shares22,527,16316,776,076
Digital Identity Company Limited25/28 Moo 12, T. Bueng Kham Phroi, A. Lam Luk Ka, J. Pathum Thani 12150Pathum Thani1215002-152-7301-4The company provides identity verification services for both Thai and foreign nationals. It offers various verification methods, including passport verification and facial recognition against databases. Additionally, the company provides consultation, design, and installation services for software and hardware systems, as well as other related products.Common shares10,00010,000

Shareholders with Potential Conflict of Interest

Has Potential-Conflict Shareholder (Y/N)

No

Relationships Among Major Shareholders

Relationship Exists (Y/N)

Yes

Description

Related Companies

1. East Coast Industry Co., Ltd. (ECI)

Established on December 17, 1992, initially to operate a sawmill, wood drying kiln, processed rubberwood business, and manufacture and distribute rubberwood furniture. Later, the business operation was changed to trading in furniture products that the company manufactures itself and imported furniture for sale, with registered capital and paid-up capital of 20,000,000 Baht. The company has the names of directors and major shareholders of the Company as directors and major shareholders of the company. However, the company held a meeting of the Board of Directors, No. 1/2555, on September 17, 2012, with a resolution from the meeting "Considered and approved to establish a business policy that will not compete with East Coast Furnitech Co., Ltd." in order to prevent potential conflicts of interest. Currently, there is no business operation and it is in the process of liquidation and closing down the business.


2. East Coast Design Co., Ltd. (ECD)

Established on July 12, 1996, to operate the business of manufacturing and distributing furniture both domestically and internationally and to import or export all types of furniture as well as related materials and equipment, with registered capital and paid-up capital of 14,000,000 Baht. The company has the names of directors and major shareholders of the Company as directors and major shareholders of the company. However, the company held a meeting of the Board of Directors, No. 1/2555, on September 13, 2012, with a resolution from the meeting "Considered and approved to establish a business policy that will not compete with East Coast Furnitech Co., Ltd." in order to prevent potential conflicts of interest. Currently, there is no business operation and it is in the process of liquidation and closing down the business.


3. V-Shat Decor Co., Ltd. (VCD)

Established on April 19, 2002, to operate the main business as a manufacturer and distributor of wood veneer paper and provide wood edge banding (PVC) cutting services for sale to general furniture factories, with registered capital and paid-up capital of 27,000,000 Baht. The company has the names of directors and major shareholders of the Company as directors and major shareholders of the company. However, the company held a meeting of the Board of Directors, No. 1/2555, on September 12, 2012, with a resolution from the meeting "Considered and approved to establish a business policy that will not compete with East Coast Furnitech Co., Ltd." in order to prevent potential conflicts of interest. Currently, there is no business operation and it is in the process of liquidation and closing down the business.


4. V-Shat Industry Co., Ltd. (VCI)

Established on June 26, 2002, to operate the main business as a manufacturer and distributor of dried processed rubberwood, with registered capital and paid-up capital of 14,000,000 Baht. The company has the names of directors and major shareholders of the Company as directors and major shareholders of the company. However, the company held a meeting of the Board of Directors, No. 1/2555, on September 14, 2012, with a resolution from the meeting "Considered and approved to establish a business policy that will not compete with East Coast Furnitech Co., Ltd." in order to prevent potential conflicts of interest. Currently, there is no business operation and it is in the process of liquidation and closing down the business.


5. B.V. Parawood Co., Ltd. (BV)

Established on October 25, 2002, to operate the business of selling processed wood, sawmills, and wood drying kilns, with registered capital and paid-up capital of 2,000,000 Baht. The company has the names of directors and major shareholders of the Company as directors and major shareholders of the company. However, the company held a meeting of the Board of Directors, No. 1/2555, on September 11, 2012, with a resolution from the meeting "Considered and approved to establish a business policy that will not compete with East Coast Furnitech Co., Ltd." in order to prevent potential conflicts of interest. Currently, there is no business operation and it is in the process of liquidation and closing down the business.


East Coast Furnitech Public Company Limited, as the "Promisee," entered into a Memorandum of Agreement on December 26, 2012, with East Coast Industry Co., Ltd., East Coast Design Co., Ltd., V-Shat Decor Co., Ltd., V-Shat Industry Co., Ltd., and B.V. Parawood Co., Ltd., each as the "Promisor." The summary of the Memorandum of Agreement is as follows:


1. The Promisor agrees not to engage in any business in the sale, transfer, mortgage, pledge, or exchange of assets of the same type, model, and kind of goods or products as the Promisee that the Promisee has been operating before or after the Promisor.

2. The Promisor agrees not to manufacture processed wood, dried wood, veneer, and other types of wood, as well as furniture, appliances made from particle board, rubberwood, and all other materials and equipment, including the sale of such products domestically or for export.

3. The Promisor agrees not to manufacture surface and edge banding paper and PVC, including the sale of such products domestically or for export.

4. The Promisor agrees not to import or export dried processed rubberwood, veneer, other types of wood, particle board furniture, rubberwood furniture, surface and edge banding paper and PVC of all types, as well as all related materials and equipment.

5. The Promisor agrees not to engage in any business under the objectives of East Coast Furnitech Public Company Limited or conduct any other activities that constitute competition in trade.

6. If the Promisor fails to comply with the Memorandum of Agreement made with the Promisee, according to Clauses 1 to 5, the Promisor agrees to pay a penalty of 5 million Baht to the Company (which the value of 5 million Baht, the Promisee has considered and deemed appropriate and acceptable, since all 4 companies currently have no income from business operations) with an interest of 7.5 percent per year from the date the Promisor breaches the contract and fails to comply with the Memorandum of Agreement made to the Promisee. And if the Promisor fails to comply with the Memorandum of Agreement, and if any damage is caused to the Promisee, the Promisor agrees to compensate the Promisee and allows the Promisee to take legal action in all cases.


6. Index Living Mall Co., Ltd. (Public)

Established on February 15, 1994, to operate the furniture manufacturing and distribution business, with registered capital and paid-up capital of 2,525,000,000 Baht. The company has Ms. Kritsanok Pattamasatyasathi as a director and major shareholder in the company. Ms. Kritsanok is the spouse of Mr. Patcharapong Suksuwat (formerly: Mr. Araks Suksuwat), who holds the position of shareholder, director, authorized director, and executive of the Company.


7. Index Interfurn Co., Ltd.

which is a company in the group of Index Living Mall Co., Ltd. (Public) established on July 1, 1972, to operate the furniture manufacturing and distribution business, with registered capital and paid-up capital of 960,000,000 Baht. The company has Ms. Kritsanok Pattamasatyasathi as a director and major shareholder in the company. Ms. Kritsanok is the spouse of Mr. Patcharapong Suksuwat (formerly: Mr. Araks Suksuwat), who holds the position of shareholder, director, authorized director, and executive of the Company.


In order to prevent potential conflicts of interest that may arise in the event that Mr. Araks Suksuwat and his spouse, Ms. Kritsanok Pattamasatyasathi, each of whom is involved as a director, executive, and major shareholder in a business of the same nature, Mr. Patcharapong Suksuwat (formerly: Mr. Araks Suksuwat), as the Promisor, has entered into an agreement with East Coast Furnitech Public Company Limited, as the Company. The main points of the agreement are as follows:

1. The Promisor agrees that while holding the position of Authorized Director, Executive Director, and Managing Director of the Company and/or still being an employee of the Company, the Promisor shall perform his/her duties in accordance with the law, the objectives, and the regulations of the Company, as well as the resolutions of the shareholders' meeting, with honesty and integrity, and protect the interests of the Company.

2. The Promisor further agrees that while holding the position under Clause 1 and/or still being an employee of the Company, the Promisor shall not engage in any activity that is of the same nature and competes with the business of the Company or become a shareholder of the Company or a partner in a general partnership or an unlimited liability partner in a limited partnership or a director of a private company or other company carrying on business of the same nature and/or competing with the business of the Company, whether for his/her own benefit or for the benefit of others, according to the Company's Articles of Association, the Public Limited Company Act, the Securities and Exchange Act, and other relevant laws, unless the shareholders' meeting has been notified prior to the resolution appointing the Promisor as a director of the Company or with the consent of the Board of Directors or the shareholders' meeting of the Company, as the case may be, according to the Articles of Association and/or relevant laws.


In the event that the Promisor fails to comply with the aforementioned terms and conditions, the Company shall have the right to claim damages that the Company has suffered from the actions of the Promisor. The lawsuit must be filed within 1 year from the date the Company or the shareholders mentioned in the following paragraph become aware of the violation and no later than 2 years from the date of the violation.

In the event that the Company does not exercise the right to claim damages as mentioned above, the Promisor agrees that one or more shareholders holding not less than 5 percent of the total issued shares may notify the Company in writing to proceed with the claim. If the Company does not proceed as notified by the shareholders within 1 month from the date of notification or the statute of limitations according to the second paragraph is less than 1 month, such shareholders may exercise the right to claim on behalf of the Company.

3. If in the future, the Promisor receives information or is offered information regarding the furniture manufacturing and distribution business that has potential and is interesting for investment, the Promisor agrees to present it to the Board of Directors of the Company for sole consideration. Even if the Board of Directors of the Company does not consider investing in such furniture manufacturing and distribution business, the Promisor will not invest with any person, jointly invest, or hold any shares by himself/herself, even if the investment conditions are less favorable.


Shareholders' Agreement

Agreement Exists (Y/N)

No

Shareholding Diagram (Group Structure)

Subsidiaries

Company NameJuristic Persons / Holders
VV Decor Co.,Ltd.EAST COAST FURNITECH PUBLIC COMPANY LIMITED · Voting rights percent: 99.95 · Shareholding proportion percent: 99.95
ECF Holdings Co.,Ltd.EAST COAST FURNITECH PUBLIC COMPANY LIMITED · Voting rights percent: 94.44 · Shareholding proportion percent: 94.44
ECF Power Co.,Ltd. EAST COAST FURNITECH PUBLIC COMPANY LIMITED · Voting rights percent: 99.99 · Shareholding proportion percent: 99.99
Planet Board Co.,Ltd.EAST COAST FURNITECH PUBLIC COMPANY LIMITED · Voting rights percent: 57.0 · Shareholding proportion percent: 57.0
Somewa Plaza Co.,Ltd.EAST COAST FURNITECH PUBLIC COMPANY LIMITED · Voting rights percent: 75.0 · Shareholding proportion percent: 75.0
VV Rich Co.,Ltd.EAST COAST FURNITECH PUBLIC COMPANY LIMITED · Voting rights percent: 99.97 · Shareholding proportion percent: 99.97

Associated Companies

Company NameJuristic Persons / Holders
Green Earth Power (Thailand) Co.,Ltd.EAST COAST FURNITECH PUBLIC COMPANY LIMITED · Voting rights percent: 0.0 · Shareholding proportion percent: 0.0 · ECF Power Co.,Ltd. · Voting rights percent: 20.0 · Shareholding proportion percent: 20.0

Joint-Venture Companies

Company NameJuristic Persons / Holders
Digital Identity Col,LtdEAST COAST FURNITECH PUBLIC COMPANY LIMITED · Voting rights percent: 25.0 · Shareholding proportion percent: 25.0

Income Structure

Product / Service Income

CategoryDescriptionThis YearThis Year %Last YearLast Year %2 Years Ago2 Years Ago %
Total revenue from operationsTotal revenue from operations1,363,4281001,390,2521001,417,531.32100
Sales Revenue1,345,82298.711,374,50398.871,374,50396.96
Furniture1,289,70394.591,290,67792.841,290,67791.05
Other products include: overlay paper, dried processed rubberwood, PVC edge banding56,1994.1283,8266.0383,8265.91
OtherOthers17,605.631.2915,749.041.1343,027.853.04

Export Income

CategoryDescriptionThis YearThis Year %Last YearLast Year %2 Years Ago2 Years Ago %
Total revenueTotal revenue1,363,4281001,390,2521001,417,531.32100
DomesticDomestic796,27458.4820,53259.02712,46650.26
InternationalInternational549,54840.31553,97139.85705,065.3249.74
JapanJapan264,12148.06294,59053.18452,88064.23
IndiaIndia213,95038.93186,97433.75135,72419.25
Other countriesOthers71,47713.0172,40713.07116,461.3216.52

Other Income

Operating Other IncomeNon-Operating Other IncomeShare of Profit
1710 · As of year: 17605.63 · Description: Total other income · As of yesteryear: 15749.04 · As of year before yesteryear: 43027.85 · 1711 · As of year: 23629.0 · Description: Other income from operations · As of yesteryear: 27279.0 · As of year before yesteryear: 13729.48 · 23629.0 · Description: Financial Income · As of yesteryear: 27279.0 · As of year before yesteryear: 13729.481712 · As of year: 1712.92 · Description: Other income not from operations · As of yesteryear: 1019.15 · As of year before yesteryear: 0.0 · 1712.92 · Description: Exchange gain · As of yesteryear: 1019.15 · As of year before yesteryear: 0.01713 · As of year: 19348.0 · Description: Share of profit · As of yesteryear: 16606.95 · As of year before yesteryear: 28199.8

Product / Service Characteristics

Business Type

3114

Business Groups

Business GroupDescription
Furniture manufacturer and distributor

Furniture Manufacturing and Distribution Business


Businesses operated by East Coast Furnitech Public Company Limited (ECF), VV Decor Company Limited, and ECF Holdings Company Limited as subsidiaries in which the Company holds 99.95% and 94.44% of shares, respectively.


East Coast Furnitech Public Company Limited (ECF) operates as a fully integrated furniture manufacturer and distributor, covering from knock-down particle board and MDF furniture, rubberwood furniture, surface paper, dried processed rubberwood for use as raw materials in furniture production, and providing edge banding cutting services (PVC) for use as raw materials in the production of particle board furniture. The Company has 2 subsidiaries: VV - Decor Company Limited (VVDecor), a subsidiary in which the Company holds 99.95% of shares with a registered capital of 1,000,000 baht (one million baht), fully paid up. It was established to operate a trading business as a distributor of surface paper, mainly for use in covering particle boards for some of the Company's customers, and ECF Holdings Company Limited (ECFH), in which the Company currently holds 94.44% of shares with a registered capital of 45,000,000 baht (forty-five million baht), fully paid up.


Currently, the Company operates as a distributor of furniture products, which are the main products for the Company, to retail furniture stores nationwide. The products of the Company and its subsidiaries can be divided into 4 main product groups, which are businesses related to furniture:

1. Rubberwood Furniture

2. Knock-down Particle Board and MDF Furniture

3. Surface Paper

4. Processed and Dried Rubberwood


The Company's revenue mainly comes from manufacturing and distributing products by order (Made to order), including knock-down particle board and MDF furniture, and rubberwood furniture, to both domestic and foreign customers. For some domestic customers, the Company manufactures products using its own brand. Domestic customers include large retailers (Hypermarkets) such as HomePro, Winner, Global House, Do Home, Thai Watsadu, Lotus, and Big C, etc.


For foreign customers, the Company manufactures and distributes products by order to furniture distributors and several large retailers (Hypermarkets) in Japan. Considering the revenue structure from total sales of the Company, currently, the Company has a proportion of sales to customers in Japan, which is the customer with the highest proportion of sales compared to total sales revenue.


However, the Company is well aware of the proportion of reliance on customers in Japan. In the past, the Company has focused on expanding its foreign customer base to other countries, which has started to show results since the fourth quarter of 2019. The Company has started to receive more orders from new customer groups from India, the United States, the Philippines, and the Middle East. The second largest proportion of revenue is from the production and distribution of products domestically, mainly by order under the customers' brands. The remaining portion, which is not significant, is produced under the Company's own brand, currently "Hasta." The domestic customers for which the Company manufactures products and produces products under the Company's own brand are large retailers (Hypermarkets), such as HomePro, Winner, Global House, Do Home, Thai Watsadu, Lotus, and Big C, etc. In addition to the aforementioned distribution channels, the Company also generates revenue from selling furniture to small furniture retailers (Dealers) who distribute furniture nationwide, as well as selling through online channels, websites, and various platforms such as Lazada, Shopee, NocNoc, etc.


Details of each product are as follows:

1. Processed and Dried Rubberwood

Rubberwood is a wood with many physical properties similar to teak. It has a beautiful grain, can be dyed, and is easy to work with. It is also lightweight and more affordable compared to other woods used in furniture production. With these outstanding properties, rubberwood has become known and widely used worldwide in a short period of time under the name "White Teak." Most of the rubberwood used in the wood industry today comes from rubber plantations in the form of newly planted trees, not naturally occurring trees. The wood that will be used is mostly old trees with low latex yield, not economically viable for further tapping. Therefore, it is necessary to cut them down and replant them according to the natural cycle of rubber plantation operations. To comply with the regulations of the Rubber Authority of Thailand, rubber plantation owners must submit a request for felling and obtain permission from the Rubber Fund. Alternatively, other types of perennial trees that require a long planting period can be used before being cut and processed. The process of bringing rubber logs to the sawmill to be sawn into the desired sizes and then impregnated with wood preservatives in the form of water-soluble solutions results in high moisture content in the wood. Therefore, it is necessary to adjust the moisture content in the wood to a level that is balanced with the weather conditions by drying it to maintain its shape and prevent problems of expansion or contraction of the wood, which can lead to cracking on the surface and inside the wood, splitting at the ends of the wood, and warping. These defects can damage the products. In addition, reducing the moisture content in the wood also helps reduce the chances of fungal growth. Therefore, processed rubberwood must have an appropriate moisture content within the standard criteria to be used in furniture production. Processed rubberwood is an important raw material used in the production of rubberwood furniture. The Company has a complete wood processing process before feeding it into the rubberwood furniture production process. It starts with the purchase of rubberwood logs for processing by sawing before drying. The Company plans the purchase of rubberwood at each period to prevent the problem of rubberwood shortages that may occur. Such problems will affect the rubberwood furniture production process. The processed rubberwood production process is complex and requires experience and production skills. The Company has a complete process, from the sawing process for log processing, the impregnation process to prevent moths and termites with a high-pressure impregnation tank, to the drying process. In addition, it also relies on the expertise of labor in the rubberwood processing process, from the sawing process, which is different from sawing general straight logs, as rubberwood logs have an irregular shape, often curved, not straight throughout the log, and have many knots and defects on the logs. Therefore, it is not yet possible to apply automatic wood cutting technology. Most of the processed rubberwood obtained from the production process, accounting for about 95%, is sent to the Company's rubberwood furniture production process, and some is sold to the public, including customers who are small factories that manufacture rubberwood furniture.


2. Rubberwood Furniture

Rubberwood furniture is durable and strong because it is made from real rubberwood. The main raw materials used in its production are rubberwood and other composite woods, accounting for approximately 35% of the cost structure of rubberwood furniture production. This proportion will vary depending on the market price of rubberwood. Due to its durability, strength, beautiful grain, ability to be dyed and easily decorated, and suitability for use in environments that require resistance to environmental conditions or outdoor use, rubberwood furniture is popular among those who prefer durable and strong furniture or those who live in areas with fluctuating weather conditions that may cause high heat or humidity. Compared to furniture made from particle board or MDF, rubberwood furniture is more expensive due to the price of raw materials and the popularity of using real wood furniture. Therefore, the popularity of using rubberwood furniture is limited to a niche group of enthusiasts and is not widespread among the majority of consumers. This group of enthusiasts considers the suitability of rubberwood furniture's properties, its aesthetics, and the lack of other products with comparable properties.


The Company's rubberwood furniture products are divided into 3 categories as follows:

1. Dining Table Set (Dining Table)

2. Living Room Set (Living Room)

3. Bedroom Set (Bedroom)


For rubberwood furniture, the Company manufactures and distributes it to customers by order (Made to order). The main customers are furniture distributors and large retailers (Hypermarkets) in Japan. The Company also manufactures rubberwood furniture for distribution to large retailers (Hypermarkets) and small furniture retailers (Dealers).


3. Knock-down Particle Board and MDF Furniture

Knock-down particle board and MDF furniture is a modern type of furniture whose main raw materials are particle board and MDF, accounting for approximately 50% of the cost structure of knock-down particle board and MDF furniture production. The second largest component is surface paper (foil), accounting for approximately 10%, with the proportion depending on the price at each period. Particle board is a product primarily made from rubberwood. Rubberwood and other types of wood are ground into small pieces and then pressed together using a binder (Urea Formaldehyde Resin) to bond the structure of the particle board. The top and bottom layers are made of fine wood particles, while the middle layer is made of coarser particles. This makes particle board unsuitable for nailing and edge decoration or tongue and groove joints on the surface. Generally, particle boards have a width and length of 4 x 8 feet and a thickness ranging from 6 to 35 millimeters. Particle board is the lightest type of fiberboard, with less strength than MDF and general hardwood. In addition, the wood expands easily when exposed to moisture. However, particle board is commonly used for interior woodwork instead of exterior woodwork where there is high humidity. Currently, it is popular for furniture production due to its lightweight, ease of assembly and transportation, affordability, and, most importantly, it is used as a substitute for furniture made from natural hardwood, which is logged from forests, which does not promote environmental conservation. Therefore, hardwood is becoming increasingly scarce. Particle board furniture has a simpler production process because most of the production process is done by machines. In addition, particle board is lightweight, so the production process is shorter and requires fewer labor hours compared to producing furniture from hardwood. All of this results in lower production costs for particle board furniture, which is a significant cost advantage. In comparison, the production process for hardwood or solid wood furniture involves sawing, impregnation, drying, cutting, assembly, sanding, painting, and varnishing. Each step requires a significant amount of labor to achieve a refined finish and takes a long time for each production step. Therefore, the Company focuses on increasing the production capacity of particle board furniture by adding modern machinery in the form of semi-automatic machines to reduce labor costs and increase production efficiency and effectiveness.


The Company's particle board and MDF knock-down furniture products are divided into 7 categories. Each category has different product models as follows:

1. Multi-Purpose Shelf

2. Multi-Purpose Cabinet / Display Cabinet

3. Wardrobe

4. Computer Desk / Work Desk

5. TV Stand

6. Shoe Cabinet

7. Dressing Table, Bed


The Company manufactures and distributes knock-down particle board and MDF furniture to customers, which can be categorized as follows:

1. Manufacturing and distribution by order (Made to order) to foreign customers. The main customers are furniture distributors and large retailers (Hypermarkets) in Japan, India, the United States, the Philippines, and the Middle East.


2. Manufacturing and distribution to domestic customers using the customers' brands (House Brand) for sale within modern retail stores such as HomePro, Winner, Global House, Do Home, Thai Watsadu, Lotus, and Big C, etc. In addition, the Company uses its own brand, "Hasta," for the production of furniture for some customers.


3. Manufacturing and distribution to domestic customers, which are retail stores nationwide.


4. Surface Paper

The Company is a manufacturer and distributor of surface paper for use in covering particle boards to enhance its aesthetics and prepare it for further use in furniture production. Paper-type surface materials have the advantage of being aesthetically pleasing and can be designed with various patterns as desired, such as designing them to have realistic wood grain patterns, and cartoon patterns, graphic patterns, according to the specified designs. Wood-like surface paper is suitable for the production of fiberboard, which, despite its disadvantage of being less resistant to moisture, is popular due to certain applications that do not require durability as a primary factor. The production process is simple, uncomplicated, and has a low production cost, resulting in particle board furniture being able to set a more competitive selling price compared to general solid wood furniture. All particle boards ordered by the Company from manufacturers must undergo a surface covering process at the Company's factory. This helps reduce production costs and transportation costs compared to ordering surface paper from outside sources. In addition to using it in the Company's production process, the Company also sells it directly to external parties, and some is sold through its subsidiary, VV - Decor Company Limited (VV Decor), in which the Company holds 99.95% of the registered capital. The nature of VVDecor's business is to be a distributor of surface paper (Trading) to some of the Company's customers. The proportion of surface paper sales to external parties currently accounts for about 40% of the total surface paper volume. All of the aforementioned products are operated by East Coast Furnitech Public Company Limited ("the Company" or "ECF"), ECF Holdings Company Limited, and VV Decor Company Limited as subsidiaries in which the Company holds 94.44% and 99.95% of shares, respectively. All three companies currently operate businesses related to furniture.


5. Additional Products

As a leader in the manufacturing and distribution of furniture, the Company is committed to expanding its product portfolio through cutting-edge innovations to meet the modern lifestyle needs of customers. Most recently, the Company has introduced the Aiper Seagull Pro, a cordless pool cleaning robot that was recognized as a CES 2023 Innovation Award Honoree. This product was showcased at CES 2023 and has been highly regarded for its high-performance wireless pool-cleaning technology. By adding this product to its offerings, the company reinforces its vision of providing state-of-the-art products, enhancing sales opportunities, and effectively meeting customer demands in the digital era.

Renewable Energy Business

Business operated by ECF Power Company Limited, a subsidiary in which the Company holds a 99.99% stake.


Solar Power Plant

220 MW Solar Power Plant Project in Myanmar


In 2017, the Company invested in a solar power plant project with a total installed capacity of 220 MW and a contracted capacity of 170 MW of Green Earth Power (Thailand) Company Limited (“Minbu Power Plant Project” or “GEP”), located in Minbu, Magway Region, the Republic of the Union of Myanmar (“Myanmar”). The Company assigned ECF Power Company Limited (“ECF-P”), a subsidiary in which the Company holds 99.99% of the shares, to invest in 20% of the project’s shares. The Company purchased 51,512 existing ordinary shares of GEP, representing 20% of the total issued and outstanding shares of GEP at that time, as approved by the Extraordinary General Meeting of Shareholders No. 1/2017 held on May 31, 2017, for a total consideration of US$9 million.


Currently, GEP has a registered capital of 2,252.72 million baht, consisting of 22,527,163 ordinary shares with a par value of 100 baht per share. The paid-up registered capital is 1,1717.16 million baht, consisting of 10,806,478 fully paid ordinary shares and 11,720,685 ordinary shares with a paid-up value of 56.72 baht per share.


GEP has one subsidiary, GEP (Myanmar) Company Limited (“GEP-Myanmar”), which is a sole investment in GEP-Myanmar and does not hold shares in any other companies. GEP-Myanmar was incorporated as a Myanmar national company with a registered capital of US$500 million, divided into 500,000,000 ordinary shares with a par value of US$1 per share. with a paid-up registered capital of US$55,088,307.


GEP holds 100.00% of the total paid-up registered capital in GEP-Myanmar. The objective of GEP-Myanmar is to develop and operate a solar power plant project in Myanmar with a total installed capacity of 220 MW and a contracted capacity of 170 MW. The project’s expiry date is September 26, 2042, for a total period of 30 years.


The first phase of the project, with a capacity of 50 MW out of a total capacity of 220 MW, has already commenced commercial operation (COD) on September 27, 2019. The construction will be divided into 4 phases. Currently, the company is planning to construct the second phase of the solar power plant with a capacity of 50 MW, while the third and fourth phases will have a capacity of 50 MW and 70 MW, respectively, to be completed within 2024-2025. However, the project has resumed normal construction after the changes due to the COVID-19 situation, including the easing of the political unrest in Myanmar. For the latest progress of the Phase 2 construction, the earthworks and site preparation have been completed. Some of the equipment and installation tools have been tested with the manufacturer and are being prepared for delivery and installation.


The total project value of the Minbu Solar Power Plant Project is approximately US$250 million, which includes the EPC contract value, consultant fees, insurance premiums, loan arrangement fees, financing costs during construction, and other project development costs. Part of the financing will be obtained through loans from financial institutions and shareholders. Currently, GEP/GEP-Myanmar is in the process of negotiating a loan for 4 phases with a financial institution from China, which has issued an Indicative Term Sheet for a loan of 85% of the EPC contract value. This is still a preliminary figure and not yet finalized. However, the project details are currently being reviewed for presentation to the board of directors of the Chinese financial institution. which is in progress and not yet completed. It is expected that the loan will be drawn down for the construction of Phase 2 soon.



GEP-Myanmar has signed a Power Purchase Agreement (“PPA”) with Electric Power Generation Enterprise (“EPGE”) (formerly Myanmar Electric Power Enterprise), an organization under the Ministry of Electricity and Energy of Myanmar. The essence is to agree to develop, construct, procure financing, manage, operate, maintain, and transfer the project, and EPGE will purchase electricity from the solar power plant project with an installed capacity of approximately 220 MW or a maximum purchase rate of 170 MW, located in Minbu, Magway Region, Myanmar, for a period of 30 years from the Commercial Operation Date (“COD”) of Phase 1 of the total 4 phases at a fixed electricity purchase rate of US$0.1275 per unit of electricity throughout the term of the PPA, including any renewal of the PPA that may occur. The electricity generation will be divided into 4 phases according to the maximum electricity generation rate that will occur when the construction of each phase is completed, as follows:


Phase 1 Maximum Purchase Rate 40 MW (AC) from Installed Capacity 50 MW


Phase 2 Maximum Purchase Rate 80 MW (AC) from Installed Capacity 100 MW


Phase 3 Maximum Purchase Rate 120 MW (AC) from Installed Capacity 150 MW


Phase 4 Maximum Purchase Rate 170 MW (AC) from Installed Capacity 220 MW


The Minbu Solar Power Plant Project has been granted an investment proposal approval and an investment permit, known as the “MIC Permit”, by the Myanmar Investment Commission (“MIC”) at its 5/2017 meeting on March 13, 2017. The permit was issued on April 12, 2017. Foreign investors wishing to make direct investments in Myanmar must obtain a MIC Permit. The key benefits are summarized below:


1. Receive the benefit of long-term land lease, with a maximum lease term of 50 years, depending on the type and size of the investment, and the lease can be renewed for 10 years for 2 times, for a total lease term of up to 70 years. (Note: Foreign investors are not entitled to own land but can lease land from the government and private Myanmar citizens for a long term.)

2. Receive the benefit of corporate income tax exemption for a period of 5 consecutive years from the year of commencement of operation.

3. Receive the benefit of being able to hire foreign experts or technicians.

4. The Myanmar government guarantees that it will not discontinue businesses permitted by the Myanmar Investment Commission (MIC) before the expiration of the permitted period without sufficient reason.

5. The Myanmar government guarantees that it will not nationalize the assets of private entities throughout the investment period.


The main points of the Power Purchase Agreement can be summarized as follows:


Date of Agreement: March 20, 2016 and the Amendment Agreement dated January 9, 2017 and the Amendment Agreement dated December 19, 2018.


Parties:


Buyer: Electric Power Generation Enterprise (“EPGE”)


Seller: EP (Myanmar) Company Limited (“GEP-Myanmar”), a subsidiary of GEP


Electricity Purchase Rate: US$0.1275 per kilowatt-hour


Electricity Purchase Volume

1. EPGE shall purchase the net electrical energy actually generated and delivered by GEP-Myanmar, which shall not exceed 105% of the net electrical energy expected to be generated under the Agreement.

2. If at any time the Minbu Power Plant generates net electrical energy in excess of 105% of the net electrical energy expected to be generated under the Agreement, EPGE shall purchase all such excess net electrical energy without any payment for such excess electrical energy.


Purchase Term: 30 years from the commercial operation date of the Minbu Solar Power Plant Project Phase 1


Commercial Operation Date: September 27, 2019 Phase 1 Capacity 50 MW


Termination: If GEP-Myanmar fails to comply with any of the terms of the Agreement within 90 days (except in the case of failure to comply with the Agreement regarding the Commercial Operation Date, such period shall be extended to 240 days), EPGE may issue a written notice to GEP-Myanmar to remedy such failure. If such failure is not remedied, EPGE shall have the right to terminate the Agreement.


The Minbu Solar Power Plant Project is located in the northwest, approximately 150 kilometers from the capital Nay Pyi Taw, or approximately 199 kilometers by car, with a travel time of approximately 4 hours. The project site will be located on a leasehold area of approximately 836 acres (or equivalent to 2,113.38 rai), which is sufficient for the construction of all 4 phases of the Minbu Solar Power Plant Project. The leasehold rights will have a term equal to or greater than the term of the Power Purchase Agreement. The leasehold rights for 700 acres will be under AVA Capital Trading Limited (“AVA Capital”) and such area is under the supervision of The Ministry of Agriculture, Livestock and Irrigation (MOALI), whereby GEP-Myanmar will sublease from AVA Capital. The leasehold rights for 136 acres will be under GEP-Myanmar, whereby such area is under the supervision of The Ministry of Natural Resources and Environment and Conservative (MONREC).


Technology used in electricity generation

The Minbu Solar Power Plant Project is a solar power plant project that utilizes photovoltaic technology, which directly converts solar energy into electrical energy using solar cells. The key equipment in the production process are:

1. Solar Panel

2. Inverter

3. Transformer

4. 230kV Substation Equipment


When sunlight hits the solar panels, it creates charge carriers, generating direct current (DC) electricity. The DC electricity is then sent to an inverter, which converts it into alternating current (AC) electricity. The AC electricity is then sent to a transformer to increase the voltage to a level suitable for the power plant to transmit electricity to the national grid line. In the Minbu Solar Power Plant Project, the AC electricity from the inverters is collected by 33 kV transformers, switchgear, and distribution systems. The electricity is then stepped up to 230 kV by four 230-33 kV step-up transformers to be transmitted to the national grid line. The main transmission line, approximately 1.3 miles (or approximately 2.1 kilometers) long, has been completed and connected to the national grid line.

Investing in a business as a furniture distributor abroad

Currently, the subsidiary, ECF Design Co., Ltd., was established to invest in a business as a distributor of furniture products abroad. The Company holds 50.9970 percent of the shares, and Homy Casa INC. holds 49 percent, with an initial registered capital of 7,000,000 Baht, divided into 70,000 ordinary shares with a par value of 100 Baht per share. Currently, there is already commercial revenue.

Personal Credit Check Services

On November 7, 2023, at the company's board of directors meeting No. 7/2023, the resolution was passed to approve the establishment of a joint venture company between East Coast Furnitech Public Company Limited and KYC Now Company Limited, a provider of identity verification services and other related services. This joint venture aims to provide identity verification services for both Thai and foreign nationals, encompassing services such as passport verification and facial recognition against databases. Additionally, it will offer consulting services, design and installation of software and hardware systems, along with other related products. The company will hold a 25% stake in the joint venture, while KYC Now Company Limited will hold a 75% stake, with an initial registered capital of 1 million baht.


Currently in the initial stages of commercial revenue generation.

Research & Development

Has R&D Policy (Y/N)

Yes

R&D Cost — Description

For the research and development in the company's furniture manufacturing and distribution in the past year 2567, the company has begun to develop various innovations to adjust its production strategy. Using new machinery and equipment, the company has adjusted its production line to respond to customer needs and order patterns. This aims to reduce lead time, production costs, and labor, aligning with the improved production line. Furthermore, the company has developed collaborations with partners, such as corrugated box manufacturers, to innovate their machinery for modern production, cost reduction, and waste reduction. For example, the production of molding blocks has been simplified to digital design and printing from files, reducing environmental waste. This will ultimately help reduce the company's purchasing costs. The company is also developing ways to reduce packaging costs, such as reducing the use of foam sheets in production.

R&D Cost — Label

Research and development (R&D) expenses over the past 3 years (Million Baht)

R&D Cost — This Year

0.62

R&D Cost — Last Year

0.18

R&D Cost — 2 Years Ago

0.7

Assets Used in the Business

Permanent Assets — Description

The Company’s fixed assets mainly consist of land, buildings, machinery, and equipment used in furniture production, construction works, and machinery under installation.

Permanent Assets — Appraisal

AssetOwnershipObligationAppraisal ValueDescription
LandTo ownPrimarily used as a credit line with financial institutions.217.54
Used as the location of offices, workplaces, furniture production areas, warehouses, and other related buildings of the company's headquarters, Branch 1, and Branch 2.
Land ImprovementsTo ownNone82.63
Buildings, Factories, WarehousesOwnershipTo be used as collateral for loans with financial institutions258.36
Building RenovationTo ownNone235.21
Machinery and EquipmentownershipSome machinery is primarily financed through loans with financial institutions.377.69
Electrical systemTo ownNone35.2
Construction in progress and machinery during installationOwnershipNone123.12
VehicleOwned by the company and leasedLease or Purchase51.05

Intangible Assets — Description

As of December 31, 2024, the company has intangible assets equal to 2.03 million baht. The items are computer software, and the company has the right-of-use assets equal to 37.38 million baht. The items are machinery leased by the company.

Has Subsidiaries Investment Policy (Y/N)

Yes

Subsidiaries Investment Policy — Description

As of December 31, 2017, the Company had 7 subsidiaries, consisting of

1. VV-Decor Company Limited

2. ECF Holdings Company Limited

3. ECF Power Company Limited

4. Planetboard Company Limited

5. Someva Plaza Company Limited is under liquidation.

6. VV Rich Company Limited

7. ECF Design Company Limited


In addition, there are 2 joint ventures in which the Company and its subsidiaries have invested. For investments in joint ventures and partnerships,

The first company is Green Earth Power (Thailand) Company Limited, in which ECF Power Company Limited, as a subsidiary, holds a 20% stake.

and the second company is Digital Identity Company Limited, in which the Company holds a 25% stake.


In considering investments in subsidiaries or joint ventures, as well as each investment project, the Company prioritizes investments in businesses that support and benefit the Company's business operations. This is done by carefully considering the return on investment, risks, and the Company's financial liquidity. Such investments must be approved by the Board of Directors and the shareholders' meeting within the scope of their authorized powers. The investments must also comply with the regulations and announcements of the Securities and Exchange Commission and the Stock Exchange of Thailand, as well as relevant principles, regulations, and laws. The Company will maintain control through the appointment of its directors and/or executives to the boards of these companies to ensure alignment with the Company's business direction and management policies.


Marketing Policy & Competition

Reporting Mode

3117

Marketing Policy (Overall)

Marketing

1. Product

For 2024, the company continues its policy of developing products to meet the needs of modern retail stores (Hypermarkets), which are the main customer group in the country, to increase from the original. The company focuses on expanding the product market by acknowledging the needs of customers in the market, the changing needs of product styles, co-designing products with customers, including offering new products that can meet the needs arising in today's world for customers to consider continuously.

In starting furniture production each time, the company's production process will start from 2 formats. The first format is that the customer will send a picture of the product they want to order (Drawing) to the company for consideration of whether the product can be produced, how the selling price will be determined, and whether the gross profit from production and distribution can be set as desired after negotiations with the customer. The second format is that the company will have a product design team, which will be responsible for designing products to present to customers. Most customers who want the company to design for them will be large retail stores (Hypermarkets), such as HomePro, Winner, Thai Watsadu, Global House, Do Home, Lotus, and Big C.

The company will present new furniture styles for consideration to decide on production and distribution. The design team will work with the production planning team, which will be the team that conducts the analysis of what materials are required to produce the written workpieces, the ease of production, and the details of the cost, including determining the selling price. Can the selling price be set at the set gross profit rate? Once the selling price is obtained, it will coordinate with the marketing department to present the price to the customer for a conclusion until receiving a purchase order from the customer. Currently, the company has a ratio between receiving product designs to be ordered directly from customers and product designs designed by the company's own product design team, accounting for 80 percent and 20 percent, respectively. However, the company aims to expand the proportion of furniture styles that the company designs itself and lead to actual production to be more than before, including aiming to create added value (Value Added) to the products that the company designs and manufactures. In addition, the company also attaches importance to the development of new product styles to be consistent with the changing trends of popularity at that time.

After obtaining a product design (Model) that is ready for production, the company will send a sample product that is molded according to the specified Model. The sample product will be sent for testing at the Department of Industrial Promotion, Furniture Industry Development Division, to test the durability, quality of use, load-bearing test according to the specified standards both vertically and horizontally, leg strength test, cushion load-bearing test, etc. All Models to be produced for export must pass all of these tests. However, in the case of Japanese customers, currently, if there is production in a new Model format, Japanese customers will test the sample product directly themselves.

In the production of each piece of furniture, the company will attach great importance from the beginning of the production process by selecting to purchase quality raw materials until the final stage of production quality control.


2. Pricing (Price)

The company has a policy to set product prices by adding a profit margin (Cost-plus Margin). The components of the price calculation are "Raw material cost + Production overhead cost + Selling and administrative expenses + Profit margin (Margin)". The pricing of products will consider competitiveness and market prices as important factors.


3. Distribution Channels (Place)

Since the company's revenue from product sales mainly comes from production and distribution according to orders (Made to order) by receiving orders from both domestic and foreign customers, the company currently has a proportion of sales to foreign customers and domestic customers of approximately 40 percent and 60 percent respectively. The company aims to distribute to foreign customers and domestic customers at a ratio of 50 percent, which is close to each other, to reduce the risk of dependence on any one customer group.

As of December 31, 2024, the group of customers who placed orders for products with the company accounted for a group of customers in Japan, all of whom are major furniture distributors and large retail stores (Hypermarkets) in Japan, accounting for approximately 19.63 percent of total revenue. However, no single customer in Japan has a total order value from the company exceeding 30 percent of total revenue. The company focuses on exporting products for sale abroad. The country where the company exports the most products is Japan, where the group of customers who place orders with the company have accepted Thai furniture products and have been trading with the company for decades.

For the production and distribution of products domestically to large retail stores (Hypermarkets), it accounts for approximately 44 percent of total revenue.

The revenue from the sale of self-assembled particle board/MDF wood furniture and rubberwood furniture in the country is divided into

1. Revenue from the production and distribution of products to large retail stores (Hypermarkets), which will include both products manufactured under the customer's house brand and products manufactured under the company's brand.

2. Revenue from sales of products through furniture retailers (Dealers)

3. Revenue from sales through various online platforms such as Lazada, Shopee, NocNoc, etc.

In the production and distribution to each customer, both in the form of made-to-order production and in the form of production and distribution using the company's brand, the company has not entered into any sales contracts with customers.


4. Sales Promotion and Public Relations Policy (Promotion)

- The company conducts public relations through the company's website www.eastcoast.co.th to be a channel to help customers find information, get to know the products, and facilitate product browsing. It is also a channel for foreign customers to access and contact the company more easily.

- The company conducts public relations via email to reach customers and target customer groups regularly at each time and every time there are interesting new products to offer as an alternative to customers, including target customer groups.

- The company participates in various trade shows every year to create awareness and open up opportunities to expand its customer base. The annual trade show schedule is as follows:

o Participate in trade shows organized by the company's customer groups, such as HOME PRO Expo, BNB Home Expo, etc.

o Participate in trade shows organized by associations and collaborations between various organizations, such as the Thai Furniture Industries Association, etc.

o Organize a trade show to present products to a group of furniture retail customers and receive product orders, which will be held regularly at least 2 times a year, which will be an opportunity to meet, talk, and exchange views on product needs together.

o From November to December of each year, organize a product discount event to return profits to customers at Branch Office 2, located in Bung Kum Proi District, Lam Luk Ka Khlong 5, Pathum Thani Province, and at the product warehouse inside the factory, which is located at the head office, Klaeng District, Rayong Province.

- The company has sales promotions or discounts for customers, such as annual product discounts, sales promotions on the company's anniversary (Anniversary), including sales promotions during important festivals throughout the year, such as New Year's Eve, Songkran Festival, etc.

In addition to the sales promotion and public relations activities mentioned above, the company will place great importance on participating in trade shows abroad to keep abreast of the movements in the furniture industry every year, including trade shows in China, Malaysia, the Philippines, etc. In addition, each year, the company will set a travel plan to visit the businesses of customer groups abroad, follow up on business progress, inquire about satisfaction to open up opportunities for marketing channels that may increase from the original, including participating in business promotion events organized by government agencies for international trade negotiations, etc.


5. Customer Credit Control and Consideration Policy Currently, the company considers giving credit terms to customers only in the group of customers who have continuous trading. If it is a new customer, there will be no consideration for credit terms. Normally, the company will consider giving credit terms to customers using the customer's business trade information and prepare a customer history register. The company has a policy of giving credit terms to domestic customers within 60 to 90 days for the group of modern retail customers (Hypermarkets) only. In the past, the expansion of distribution channels and marketing strategies to a wider range of retail customers across the country has resulted in the company starting to have a longer debt collection period than before. In this regard, the company has accelerated the issuance of policies to reduce the risk of debt collection from this group of customers and put in place prudent and appropriate debt collection measures to prevent the risk of bad debts or debts that may not be collected to the least or at an acceptable level compared to the opportunity to expand the market that will increase. For foreign customers who have continuous trading, currently, all payment methods are Letter of Credit, which will include both at sight credit terms and instant transfer (T/T) before the delivery date (Shipment Date). If it is a new customer, the company has a policy to specify that customers open a Letter of Credit at sight with a reputable bank abroad only to cover the trade risks that may occur.

Industry & Competition (Overall)

Sluggish domestic market – Domestic furniture sales continued to decline as the economy has not fully recovered, household debt levels remain high, and the real estate market has slowed, causing consumers to be cautious about spending. In the first 4 months of 2024, sales decreased by 2.6 percent compared to the same period last year (YoY).


Exports begin to recover – Although the value of Thai furniture exports in 2023 decreased by 15.6 percent, exports began to improve by 4.8% in early 2024 compared to the same period of the previous year, especially in the US market, which grew by 11.9%, while the Japanese and Chinese markets remained sluggish.


Competition in terms of cost and raw materials – Wood furniture manufacturers are facing rising raw material costs, especially for parawood, forcing them to adjust product prices, which may affect their competitiveness. This is consistent with the past year, where the company experienced higher wood material costs due to price increases from suppliers.


Consumer and Product Trends

1. Designs that meet the needs of the modern lifestyle – Consumer needs have changed, with an emphasis on furniture that connects with nature, integrates technology, and can be adapted to different needs (Multitasking).

2. Product and environmental standards – Safety and environmental standards are key factors determining competitiveness. Entrepreneurs must develop in line with global market regulations to build credibility and add value to their products.


Overall Conclusion: The Thai furniture industry in 2024 continued to face challenges in the domestic market due to the fragile economic situation. However, exports began to recover, especially in the US market. However, raw material costs and product standards have become important factors determining the competitiveness of Thai entrepreneurs in the global market.

Domestic/Export Sales Ratio (Overall)

CountryRatio (%)
Thailand60
Japan19.63
India15.9
United States of America2.9
Philippines1.67

Procurement of Products & Services

Reporting Mode

3117

Procurement (Overall)

For the marketing policy of furniture products, which are the products that the company can generate the highest proportion of revenue from business operations, the company still focuses on generating revenue growth from sales in all distribution channels, both domestically through hypermarkets, distribution through furniture dealers nationwide, and online distribution through various platforms such as Lazada, Shopee, NocNoc, etc., by presenting products in new forms that are diverse and meet the needs of various uses.


For exports, the company focuses on finding new customers abroad, which currently has a good growth trend in the group of Indian, Filipino, and Middle Eastern customers, which can be seen from the significant revenue growth in the past year 2024 from Indian and Filipino customers. with growth rates of 14 percent and 213 percent, respectively.

Raw Material Acquisition (Overall)

In terms of furniture production, the company currently has 2 factories used as production bases, which are divided into the head office and Branch 1 as follows:

1. Head Office, located at 37/9 Moo 10, Bangbueng – Klaeng Road, Thangkewian Subdistrict, Klaeng District, Rayong Province. This factory consists of 9 buildings used for production, divided into:

1. Furniture production buildings 6 buildings

2. Warehouse buildings 3 buildings

3. Showroom (temporary) Small building 1 building

4. Raw Material Warehouse (Small) 1 building

5. Surface Treatment and Wood Raw Material Warehouse 1 building (increased from the previous year)

6. Small building for packing fittings 1 building (increased from the previous year)

This head office will only operate production lines related to self-assembly particle board/MDF furniture.


2. Branch 1 is located at 29/1 - 2 Moo 3, Chongko – Chumnumnai Soi, Wang Chan Subdistrict, Wang Chan District, Rayong Province. This factory consists of 7 buildings used for production, divided into:

1. Furniture production buildings 2 buildings

2. Sofa production building 1 building

3. Sawmill, Rubberwood Drying Kiln, and Wood Warehouse + Store, Rubberwood Sofa, 2 buildings (increased from 1 building in the previous year)

4. Warehouse for preparing raw materials (paper store) 1 building

5. Warehouse for storing finished goods for delivery 1 building

6. Surface paper production building 1 building

This factory will only operate production lines related to sawmills, rubberwood drying kilns, rubberwood furniture production and assembly plants, and surface paper production plants.


The company has a format for opening production lines each day, which can be divided as follows:

- Normal working hours (Shift 1) start from 07.00 – 16.00 hrs., which is 1 shift.

- Normal working hours (Shift 2) start from 17.00 – 02.00 hrs., which is 1 shift. There are no overtime working hours (OT). If any, it will only continue for 1-2 hours, considering only the work necessity.

Currently, the company does not operate 24 hours a day.

In the production of each piece of furniture, the company places great importance from the beginning of the production process by selecting and ordering quality raw materials to controlling the quality of production from the first to the last step, with details as follows:


- Rubberwood Furniture Starting from purchasing logs from suppliers, who are brokers who collect wood from rubber plantations to deliver to the factory. The wood must be of the specified size and quality. Once the rubberwood logs of the specified quality and size have been obtained, they are brought through the sawmill and kiln drying processes, which the company has had experience in since 1995 and is considered the starting point of the company's business operations. Throughout the past, the company has been able to accumulate knowledge and experience, resulting in quality processed rubberwood ready for use in the rubberwood furniture production process. In the rubberwood furniture production process, the company prioritizes production technology by investing in semi-automatic machinery, including cutting, turning, and drilling machines controlled by high-precision computer programs (CNC) to increase the ability to control the quality of workpiece production and help reduce the problem of relying on labor skills in production. In every step of production, the quality of the products must be inspected before being sent to the next stage of production to ensure that the products meet the specified quality standards.


- Particle Board/MDF Furniture, Self-Assembly Starting with the selection of quality particle board suppliers, it must be particle board made primarily from rubberwood, which is the best quality wood compared to particle board made from other types of wood scraps. Combined with the white color of the rubberwood, it can be covered with light-colored surface paper without worrying about the wood grain clashing with the color of the surface paper. As for the glue used for laminating the surface paper, the company has chosen to use environmentally friendly glue. In addition, the company also has a strength in frame cultivation, which is a work that the company produces entirely for export to Japan. There are only a few factories in Thailand that can produce frame cultivation work because it requires experience and expertise. The advantage of frame cultivation is the use of particle board and MDF to form the frame for furniture production. The resulting product has the advantage of being lightweight and easy to assemble. In terms of production technology, the company has invested in semi-automatic machinery, including cutting, turning, and drilling machines controlled by high-precision computer programs (CNC) for use in particle board furniture factories, separate from the machinery used in the production of rubberwood furniture. The company's particle board furniture has an additional advantage in terms of production costs because the company is a manufacturer of particle board surface paper itself, which will help reduce costs in the surface paper section compared to ordering surface paper from outside by about 40%.


However, during some periods when the company has a high volume of orders for particle board/MDF furniture, the company may need to outsource production from external factories to meet orders and deliver products to customers in a timely manner. However, the company has a policy to prioritize and emphasize quality control from external manufacturers to ensure that the standards and quality are equivalent to the production of goods from the company's factory. Products manufactured by external factories are mainly for distribution through retail furniture dealer channels nationwide. The reason for producing from the company's factory focuses on large quantity orders or products of the same type or model with large orders to ensure efficiency in cost management and production expenses within the factory.


- Surface Paper Starting with the selection of paper suppliers to be used in the production process, the company plans to purchase all paper in advance. The order will be placed every 6 months from a major paper manufacturer in Japan. If the said major paper manufacturer does not sell paper as a raw material for the company's surface paper production, the company can still order paper for use as a raw material from both domestic and international sources. However, the disadvantage is that the purchase price will be higher than that of the aforementioned major paper manufacturer. There are also limitations in the variety of colors and coating materials used in the production process. In summary, the company places importance on the use of quality raw materials, modern machinery in production, as well as attention to detail in every step of production. The company emphasizes quality control and testing of every piece of its products. The company must also undergo consideration and quality inspection by customer representatives in the final stage to obtain a quality certificate. Only then will the company be able to determine the date and schedule for delivery with the shipping company. It can be seen that every step must go through continuous consideration, inspection, and quality control of production standards to ensure that the furniture and surface paper products that the company produces and distributes, in addition to having a beautiful design, are also durable, strong, and suitable for use. It can be said that the company produces high-quality and standardized products that are well-recognized. In the past, the company's products have received good interest and response from customers both domestically and internationally.

Production Policy (Overall)

The company's production policy is to manufacture based on purchase orders received from customers. This is taken into consideration along with production to maintain sufficient inventory for timely delivery of potential future orders, referred to as the anticipated customer order section, to create sales opportunities. Furthermore, there are only two production shifts, and there is no policy to allow overtime work to control production costs effectively.

Distributors (Overall)

In 2023, the Company's total raw material purchase ratio is divided into domestic and international purchases, equal to 96.67 percent: 3.33 percent. In order

The Company does not enter into any sales and purchase agreements to purchase raw materials from each manufacturer or distributor. For the purchase of raw materials from each manufacturer or distributor, the purchasing department will compile a comparison of the terms and conditions of manufacturers and distributors twice a year. The information will be compiled and reviewed by comparison in December to be used as a database for orders from January to June, and in June to be used as a database for orders from July to December. The Company has a policy of distributing purchases. It will reduce the proportion of purchases if it is found that there is an excessive amount of raw material orders with any one distributor. Currently, the Company does not rely on any one manufacturer or distributor, and the Company does not purchase raw materials from any person with whom a conflict of interest may arise.


In addition, considering the main raw material suppliers to the Company, it was found that no single supplier had sales to the Company exceeding 30 percent. The top three main raw material suppliers of the Company accounted for approximately 18 percent, 15 percent, and 10 percent of total purchases, respectively, and had a business relationship of 7 to 15 years.

Production Capacity (Overall)

ItemUnitUnit (if Other)UsedCapacity
Kiln-dried rubberwoodOthersCubic meters per year74.016,439
Self-assembly particle board/MDF furnitureOthersCubic meters per year6197,600
Rubberwood FurnitureOthersCubic meters per year59.94,732
Coated paperMeter59.0114,163,130

Domestic/Overseas Purchase Proportion (Overall)

Raw MaterialSource CountryValue
Particle board, MDFThailand281,415,635.38
Materials and Equipment (Fittings)Thailand117,158,801.1
Cardboard boxThailand87,471,012.16
Other equipment includes foam, foam sheets, drawing paper, and consumables.Thailand56,754,029.68
LacquerThailand74,935,163.2

Product Information — Overview

Introduction

The Company will only disclose information on products by product line or business group that can currently generate commercial revenue.

Projects Under Construction

Has Projects Under Construction (Y/N)

No

Debentures & Bills of Exchange

Has Debentures (Y/N)

Yes

Debentures

Debenture NameInterest Rate (%)OutstandingMaturity DateTermTypes
Bond No. 1/2022, Series 2, due for redemption in 20257.4389.029 June 202532789 · Description: Senior Debenture
Bond No. 1/2022, Series 3, due for redemption in 20257.3240.59 June 202532789 · Description: Senior Debenture
Bond No. 1/2023, Series 2, due for redemption in 20257.0574.811 May 202522789 · Description: Senior Debenture
Bond No. 1/2023, Series 3, due for redemption in 20267.1525.211 May 202632789 · Description: Senior Debenture
Bond No. 2/2023, Series 1, due for redemption in 20257.317917 May 20251.52790 · Description: Secured Debenture
Bond No. 2/2023, Series 2, due for redemption in 20267.62817 February 20262.252790 · Description: Secured Debenture
Bond No. 2/2023, Series 3, due for redemption in 2028949.517 November 20285.012790 · Description: Secured Debenture

Convertible Securities

Has Convertible Securities (Y/N)

Yes

Convertible Securities

Security NameIssued DateExercise Date(s)Maturity DateExercise PriceExercise RatioAllotted SharesConvertible SharesUnconverted SharesRemaining ConvertibleNotification Period
The Warrant(s) to purchase ordinary shares of East Coast Furnitech Public Company Limited No. 5 (ECF-W5), issued in name certificate and transferable or Warrant Substitute, which details are specified in Terms and Conditions (ECF-W5)2024-07-30The Warrant Holders can exercise their rights to convert into the Company’s ordinary shares according to the following scheduled date: 1. 30 November 2024 2. 30 March 2025 3. the last exercise date will be on the same date as the expiration date of the Warrant which is 29 July 2025.2025-07-290.551.000:1.000479,742,753479,742,753479,742,753479,752,824Between 9:00 a.m. and 3:30 p.m. of every business day, within 5 (five) business days before each exercise date, except in the case of the last exercise date notification of intent, in which case the period shall be 15 (fifteen) days before the last exercise date.
Contents